Made some design updates based on feedback I received from a couple fellow keyboard designers and I just received the first two prototypes this week. Super happy with how they turned out.

More photos here.

  • N3Cr0@lemmy.world
    link
    fedilink
    arrow-up
    41
    arrow-down
    2
    ·
    5 days ago

    Looks funny and elegant, but typing appears to be a nightmare on this layout.

    • wjrii@lemmy.world
      link
      fedilink
      English
      arrow-up
      20
      arrow-down
      1
      ·
      edit-2
      4 days ago

      The joke of this board is that the “QAZ” layout is not uncommon in “40%” and smaller keyboard, but leaves the user with extra keycaps. Most folks who would try using this board would configure it so that “Esc,” “Tab,”, and left “Shift” do Q, A, and Z respectively. The whimsical keys on the right would be for macros, navigation, or whatever the individual prefers, though IIRC @cloffwrangler@lemmy.world tried it with them mapped to the letters, like the mad lad he is. :-)

    • fishos@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      13
      ·
      edit-2
      4 days ago

      No numbers, important keys shoved out of reach… OP expects you to bind OTHER IMPORTANT KEYS LIKE ESC/TAB/SHIFT TO BE BOUND TO Q in order to function…

      Might as well just grab a macropad at this point. You’ll almost never use the keys for one thing anyways and you’ll be doing Ctrl+/Fn+ combos constantly(except you don’t even have those buttons, so what are you making combos out of anyways?).

      I wouldn’t even use this for an emulator. WASD is completely borked and the buttons you’d bind them to instead would then be lost as well and those need to be rebound too. A controller is more useful than this ever would be.

        • fishos@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          arrow-down
          12
          ·
          4 days ago

          How would you even type a “?” with that keyboard. No, I would not use a keyboard that was missing all numbers, 90% of symbols and threw 3 of the keys haphazardly to the side.

          This is a joke at best and mostly just waste. Just because you can doesn’t mean you should. It’s junk like this that makes the alternate keyboard community look like a bunch of schizos. “Why would I use something that works when I can remove tons of functionality to be cutesy?”.

          Hard pass.

          • HatchetHaro@lemmy.blahaj.zone
            link
            fedilink
            arrow-up
            9
            ·
            edit-2
            1 day ago

            Chords and layers, my guy. Much in the same way you type a capital letter with a combination of two keys (shift + letter), people using smaller keyboards do the same thing for any key you deem “missing”, just with more keys being pressed. There’s even functionality where each key behaves differently depending on whether you tap or hold it.

            Technically, you can have only 10 keys (one for each digit on your hands) and still get 2^10 = 1024 unique actions! Forget letters; you can have have whole words encoded in those keys, and voila ~ that’s basically stenography!

            If you don’t like it, that’s okay! I’d never be able to use one myself either, but the people who can use it do like it; and besides, it’s all good fun to see what people can do with these layouts.

            • N3Cr0@lemmy.world
              link
              fedilink
              arrow-up
              2
              arrow-down
              1
              ·
              4 days ago

              I still wonder how anyone would remember and adjust to all these key combos, since there are no labels for them.

              I imagine having to look up each character on a large A2 poster.

              • HatchetHaro@lemmy.blahaj.zone
                link
                fedilink
                arrow-up
                4
                ·
                3 days ago

                The same way creative professionals learn keyboard shortcuts for software like Blender, Photoshop, or Premier: practice.

                It seems daunting, but honestly it’s not that difficult to adjust to using layers or chords on a smaller keyboard, especially when you can assign all those inputs to any key combo you want.

  • penquin@lemm.ee
    link
    fedilink
    arrow-up
    13
    ·
    4 days ago

    Do you actually use this keyboard, or is it just for show? Genuine question, btw.

    • cloffwrangler@lemmy.worldOP
      link
      fedilink
      arrow-up
      14
      arrow-down
      2
      ·
      4 days ago

      It’s my daily driver. I was using the original prototype up until this one was delivered. Same layout, just a slightly different case design.

      • penquin@lemm.ee
        link
        fedilink
        arrow-up
        8
        ·
        4 days ago

        Man, you are a different breed then. I’d probably die of stress if my keyboard was this small. 😂

          • penquin@lemm.ee
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            4 days ago

            Holy shit, that’s a massive keyboard. I’m a 96% guy. This is the one I have. I replaced the key caps with keychron’s high profile KSA, the switches with baby kangaroo and taped the board and put extra foam in there. It now sounds fantastic. I’ll keep it until it falls apart.

          • 3ntranced@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            4 days ago

            Man, if not for the tiny space frame keys and the 80s grain keycap texture I’d buy this in a hearbeat.

          • penquin@lemm.ee
            link
            fedilink
            arrow-up
            4
            ·
            4 days ago

            Definitely not for me and never will be, but I 100% understand and will never judge you. As long as you’re happy with it. This is like Linux for me, it is not for everyone but it makes me happy :)

    • cloffwrangler@lemmy.worldOP
      link
      fedilink
      arrow-up
      25
      arrow-down
      1
      ·
      4 days ago

      My friend always says my Vault 35 doesn’t have enough keys so I made this layout on Keyboard Layout Editor as a joke and then he said I should make it a real keyboard and then I posted it on the 40s discord and they said I should make it a real keyboard and next thing I knew I was making 3d printed prototypes and shopping for manufacturers.

  • chi-chan~@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    4 days ago

    Why QAZ? Aren’t your brain looks for those keys on the left side?

    I always found the idea of small keyboards peculiar; I always wanted MORE keys. Could you explain the idea?

    • HatchetHaro@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      15
      ·
      edit-2
      4 days ago

      The QAZ keys on the right is a joke. This keyboard layout is called a QAZ/35% layout, where the Q, A, and Z keys are gone. The Esc, Tab, and Shift keys on the left side default to typing Q, A, and Z respectively, with further keys hidden behind chords and layers.

      I believe OP is making this keyboard as a response to someone’s reaction to the QAZ board, right here on Lemmy.

      To answer your question, many people prefer smaller keyboards mainly because 1. they’re gamers and want more space for their mouse, and 2. smaller keyboards minimize hand movements and therefore are more ergonomic.

    • cloffwrangler@lemmy.worldOP
      link
      fedilink
      arrow-up
      9
      ·
      edit-2
      4 days ago

      I first got into 40s because I wanted more free desk space and then I moved to a 35%. My friend always said my 35 didn’t have enough keys so I designed this layout as a joke but enough people liked it that I decided to actually make it.

      In my default layout, QAZ are mapped to Esc, Tab, Shift and I use the keys on the right for macros.