Right, so this is the situation: I still haven’t obtained my license here in Brazil, but I already have a Baofeng DR-1801 HT that can connect to dmr networks. Therefore I haven’t transmitted yet. But I’d like to clarify some doubts:

  • When I get my license, even in C-class in Brazil, I will be allowed access to some frequencies in 40-10m bands. Should I get a low power QRP transceiver (e.g. uSDX) or go for an used rig from known brands?
  • It’s almost impossible to find a transceiver project with a power rating greater than 10w. What would be the difficulty of, say, copylefting the schematics of an ft-7b?
  • Can I really use a wire thrown over my house (of course, with baluns and stuff) as a monopole antenna or that’s just myth?
  • OneCardboardBox@lemmy.sdf.orgEnglish
    4·
    6 months ago

    Yes, it’s the ratio of how much of the power that you transmit is reflected back towards your rig due to impedence mismatch of antenna <-> radio.

    Ideally you want SWR < 2, but for simple voice modes at QRP power, it’s not the end of the world if you end up in the 2-3 range. However digital modes need a good SWR because they transmit at 100% duty cycle. If I don’t get SWR < 2 for my IC-705 during a digital transmit, the reflected power causes my computer’s USB port to reset. At higher powers it could damage my rig or my computer, so it’s definitely a thing to avoid.