Look up the GPU on these charts to find out what codecs it will support: https://developer.nvidia.com/video-encode-and-decode-gpu-support-matrix-new

NVENC support will tell you what codecs your GPU can generate for client devices, and NVDEC support determines the codecs your GPU can read.

Then compare it with the list of codecs that your Intel can handle natively.

If you want to move your containers to a different location, look into configuring docker’s data-root: https://stackoverflow.com/questions/24309526/how-to-change-the-docker-image-installation-directory

You copy /var/lib/docker to a new location and update /etc/docker/daemon.json

I will say: Moving data-root to an NFS mount isn’t going to work well. I’ve tried it, and docker containers rely on filesystem features to run their overlays. On an NFS, this feature isn’t present, so your services will duplicate the container’s entire filesystem. This will tank your performance and is basically unusable for anything but trivial examples. Docker data-root basically needs to be a “physical” disk.

I’ve had no issues using NFS shares mounted as docker volumes. It’s just the data-root where it’ll fail.

If you’re doing it from scratch, I’d recommend starting with a filesystem that has parity checks and filesystem scrubs built in: eg BTRFS or ZFS.

The benefit of something like BRTFS is that you can always add disks down the line and turn it into a RAID cluster with a couple commands.

Yep, the problem was that docker started before the NFS mount. Adding the dependency to my systemd docker unit did the trick!

isn’t it an annoyance having to connect to your home network all the time?

It’s less annoying than the gnawing fear that my network might be an easy target for attackers.

So many bad-faith arguments being made about this.

Independent of any arguments about who asked for this to happen and why: A free software project always has the right to choose which contributors it trusts and which it doesn’t. I’ve seen no evidence that these people are banned from submitting patches due to their nationality. They’ve been remove from a particular role in the project due to political reasons. An organization is an inherently political entity.

Remember when codes of conduct destroyed all of free software and nothing ever got built again? Me neither. It’s the same thing.

Maybe they’re not mammal nipples, but happen to look like it.

Surely this could be good, right?

If celebrities need to be accessible to their biggest fans, maybe it would induce them to leave the birdsite? And if this is as big a migration as the article suggests, it has the potential to snowball in network effects, giving other influential users one less reason to feel chained to a dumpster fire.

Thanks!

I worked on a product that was only allowed to return 200 OK, no matter what.

Apparently some early and wealthy customer was too lazy to check error codes in the response, so we had to return 200 or else their site broke. Then we’d get emails from other customers complaining that our response codes were wrong.

I’ve been browsing your blog as part of a plan to build my own node using some ESP32s I have lying around from a prior project.

I was wondering if you know of any recommendations for a 900MHz transceiver module that I could use for US node?

I’m not sure if amateur radio is due for an external September. Most people don’t see the point, since they have phones and Internet.

I guess we could see HF airwaves fill up with frivolities? But all the new operators would open up opportunities for cool new digital modes to make the most of shared resources. I’d love if there were enough people in my area to start a broadband Hamnet.

Yes, OP I highly recommend a GL.iNet device. It’s pocket sized and always does the job.

It’s also great for shitty wifi that tries to limit how many devices you can connect. The router will appear as one MAC and then all your other devices can route traffic through it.

1. Study free materials available online.
2. Take free practice tests.
3. Look for license exams in your area, or take an online one. Exam fees in my experience have been ~$25 and go towards whichever club is proctoring.
4. Pay the $35 FCC licensing fee and get your callsign.

Theoretically, that’s all you need. It’s possible to use certain internet linked amateur transmitters for no cost as long as you have a valid callsign. However, I promise it’s a lot more fun with a real transceiver. You can buy a bare minimum, highly hackable handheld VHF/UHF transceiver for as little as $20.

Or you can slowly give your soul to the moneypit of HF equipment…

If it’s just for movies, consider an Intel ARC A380.

Small, cheap, great transcoding performance, and its drivers should be shipped by default with most distros. It really can’t do games though.

In the USA, property taxes are how most towns and cities get the majority of their funding. 200€/year would be crazy low.

In my medium cost of living town (USA), taxes come out to 4, sometimes 5 figures a year. Plus as the area becomes more desirable, property taxes (based on the sale price of a home) go up for recent buyers.

1. Wander around as a group
2. Look at all the different options
3. Split up
4. Get what you want
5. Meet back up
6. Share if you want

Repeat steps 3-6 as needed

As someone who has owned enterprise servers for self-hosting, I agree with the previous comment that you should avoid owning one if you can. They might be cheap, but your longterm ownership costs are going to be higher. That’s because as the server breaks down, you’ll be competing with other people for a dwindling supply of compatible parts. Unlike consumer PCs, server hardware is incredibly vendor locked. Hell, my last Proliant would keep the fans ramped at 100% because I installed a HDD that the BIOS didn’t like. This was after I spent weeks tracking down a disk that would at least be recognized, and the only drives I could find were already heavily used.

My latest server is built with consumer parts fit into a 2U rack case, and I sleep so much easier knowing I can replace any of the parts myself with brand new alternatives.

Plus as others have said, a 1U can be really loud. I don’t care about the sound of my gaming computer, but that poweredge was so obnoxious that despite being in the basement, I had to smother it with blankets just so the fans didn’t annoy me when I was watching TV upstairs. I still have a 1U Dell Poweredge, but I specifically sought out the generation that still let you hack the fan speeds in IPMI. From all my research, no such hack exists for the Proliant line.

On Linux, I run fwupdmgr to periodically check for firmware updates. Not every manufacturer supports it yet, but I’ve had good results with a few laptops. Not sure if it supports BIOS.

Also though, I generally try to leave my BIOS alone if everything is working fine. Unless I hear of a reason to update, I’d rather stay on a stable version.

Assuming that the disk is of identical (or greater) capacity to the one being replaced, you can run btrfs replace.

https://wiki.tnonline.net/w/Btrfs/Replacing_a_disk#Replacing_with_equal_sized_or_a_larger_disk