I’m looking to upgrade my Plex and game server. I currently have an i5-4690K with 16 GB DDR3 and it’s struggling a lot. My PSU is a 850W gold rated EVGA from 2017 so I don’t think it needs upgraded quite yet since I’ve been way under the wattage for most of its life.

I was looking at something like a 13400 but I’m not sure if it’s the best choice or what to pair it with.

  • noja@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 year ago

    Have a look through the forums at serverbuilds.net Honestly, there is no point in getting into the server game and buying new unless you are using it for a business or have a great deal of cash to burn. Plus, sticking with used tech is way better for the environment.

  • themoonisacheese@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    I’d avoid buying new. For the same price as new, you could get a server or 5 from liquidation auctions and old stock. Companies basically give away 5 year old hardware when the warranty expires (the reason they buy new is the warranty, so they can blame it on Dell if they lose a lot of money and Dell doesn’t try to help).

  • bigredgiraffe@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    It depends on what you mean by struggling but you can get pretty far with an 8th or 9th gen i5 and 16gb of RAM, would be a pretty cheap upgrade these days. The huge jump in quality for QuisckSync was between the 7th and 8th gen from what I remember so it doesn’t have to be new. If you are worried about power I think that it’s 65 or 70w for the 8th gen ones.

    For what it’s worth, my current Plex machine is an 8500k with 32 gb of memory and a 250w power supply since it doesn’t have local storage and it has been running 24x7 for about 4 or so years now. I once load tested it for fun and I was able to do 7 or 8 4k transcodes and it wasn’t really its limit, I have no complaints haha.

  • VexCatalyst@lemmy.fmhy.ml
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Without knowing your system utilization numbers it’s impossible to give good recommendations.

    I recently upgraded my system from a 4th gen i5 with 8 GB ram (Main board maxed) to a 6th gen i5 with 64 GB of ram (Again max out the main board).

    Before the upgrade I was sitting at 95% ram usage + 3 GB swap usage with the proc averaging 0.56 load, io wait was averaging 30%. In other words, I was clearly RAM bound.

    After the full body transplant, I was using 23 GB ram with a 1.52 load average and 0 swap. Io wait at 3%.Not enough time for averages yet, but there was night and day difference in application performance.

    Let your system stats dictate what you need to upgrade.

    • jws_shadotak@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      CPU and RAM are consistently >90%. It’s mostly qbittorrent doing that by caching files I’m seeding.

      Game servers are mostly stable but Plex struggles if it’s transcoding (necessary due to video file types and who I’m streaming to).

  • empireOfLove@lemmy.one
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    1 year ago

    Intel’s not good for power efficiency. Id recommend any old entry level b550 AM4 motherboard, drop a ryzen 5600x in it, buy 32 gigs of dirt cheap DDR4. You’ll be out the door $250 and be in amazing shape using half the power of Intel’s hungry 13th gen 14nm+++++++++. If you wanna spend a little more get a 5800x for 2 more cores. It’ll handle all your server stuff no sweat.

    • MangoPenguin@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      No Quicksync with AMD which means you’re stuck on CPU transcoding, and much higher power usage for that.

      For comparison a 7th gen and up Intel iGPU with quicksync can do something like 20-30 1080p Plex transcodes.

    • innercitadel@lemmy.nz
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      If they want to transcode they’ll need a dedicated GPU in that instance because they’ll lose QuickSync.

    • TrenchcoatFullOfBats@belfry.rip
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’ve been pretty happy with the Intel T series processors. Running 2 i7-6700Ts and one i7-8700T. Both have a TDP of 35 watts.

      I’m using them in Proxmox machines and they’ve been super reliable while using very little power.

    • jws_shadotak@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Just double checked and the 13400 is 65W just like the 5600x, which has no iGPU. I know AM4 and DDR4 would greatly reduce the cost of this upgrade but I’d like this to last as long as possible for me.

      • BigDev@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        If you’re mainly using this server for plex, then a 13 series Intel with quicksync will be the way to go, from what I read the newest generation of quicksync is really good for transcodes. That and more RAM, can never have enough ram!

        Is plex transcoding what’s making your server struggle? Even with older gens, I would think using hardware transcodes would keep the cpu load light. At least that’s what I noticed when I dropped an nvidia card into my server (no integrated graphics in my cpu)

        • jws_shadotak@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Yes, Plex transcoding is awful. Hardware transcodes aren’t possible on that build because I have nothing that supports it. The earliest QuickSync capable Intel chips are the 8000 series.

          • BigDev@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            If money is tight, then the cheapest solution would probably then be an nvidia GPU with NVENC support, since you wouldn’t have to upgrade anything to make it work (assuming it fits in your case of course) . I believe I managed to grab my 1050TI for about $100USD, and it supports many, many streams, especially with the NVENC unlock driver patch, and my cpu sits pretty at maybe 10% usage tops.

            • jws_shadotak@lemmy.worldOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Money isn’t too tight - I have a $250 Amazon credit right now to use on whatever.

              I’d really prefer to upgrade the CPU because it’s already overclocked and still struggling. When I host a game like Space Engineers, I get massive lag spikes as it tries to keep up.

              The CPU is just not enough for what I would like to do.

              • BigDev@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Both are good ideas! A newer Gen cpu is never a bad thing in this hobby. Either method will do you good, so if you’d rather have the extra cpu horsepower of a newer cpu, you should go for it!

                I have no opinion or knowledge of which Intel cpu is best for you besides “bigger number = more better” so hopefully the other responses with advice are accurate. Good luck!

      • themoonisacheese@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Fyi Intel and AMD don’t count TDP the same way.

        In a sane world heat output = power consumption (yes not exactly but for our purposes it works) but Intel has a fudge factor to it’s TDP number and AMD straight up doesn’t count power or heat output in it’s TDP formula and basically just makes it up (the formula includes such factors as “how hot should the part run ideally?”). They more or less agree in general but just because the 2 numbers are the same doesn’t mean they are comparable.