I actually tried this as my second step in trouble shooting, the first being using different ports.

In the non-omada management software, it defaults to 10G, and if the devices is on before the switch it negotiates 10G correctly and works at full speed (tested with iperf3). As soon as any of the 10G connected devices is rebooted, I’m back to 1G. To fix it, I then have to set the port to 1G with flow control on, apply changes, save config, refresh page, change to 10G with flow control off, apply, save config and it goes back to 10G again. Alternatively I can reboot their switch and it’s fine again.

In Omada its the same, fewer steps to get there but I have to sometimes do it 2-3 times before it works.

Same issue with both 10G TP-Link switches, so I’m thinking it might be the SFP. Using Intel SFP+ with FS optical cables. I’m using a DAC for the uplink from the 10G switch to my unmanaged 2.5G switch, and that doesn’t have the problem of dropping, always works max speed.

Fair enough. Is there anything one can do to mitigate? Like I know for the recent issue in the news, a mitigation strategy for consumers is to basically reboot their router often. I keep my router and all hardware up to date, and try to follow news here. Not sure if there is really anything else I could do.

Oh wow, hard to believe a huge bug like that would make it to production. What do you recommend instead? Stick with TP-Link?

From what I’ve seen it seems consumer routers, but it raises flags is all, and makes me reconsider options.

I’ll give that a shot, thanks!

Thanks for the detailed reply.

So the command gives me an error that nfs-client cannot be found.

The fstab just has basic default config. No timeout set.

I considered network issues, though it seems to be quite stable for other services. Not ruling it out just yet. I have a new switch coming in the next week, so will test if the issue persists when I put that in.

I will also give autofs a shot.

Thanks!

Haha don’t cut it up just yet! I’ll try some of the other options suggested here, as I’d like to learn what the issue is. The worst case I’ll try smb.

Thank you, will try this when I have time later this week.

They are mounted via the gui, but it just puts the mount into fstab. I checked the config there and it is just the standard default options for an nfs mount.

Edit: and no, I don’t lose it on reboot. Reboot re-mounts the share correctly.

Through the Cockpit gui, which just puts it into fstab. I checked the fstab config and it just has the basic default settings.

Doesn’t seem like it as far as I can tell.

Depends on the ISP. Many don’t allow you to use one they didn’t provide.

You don’t have to rebuild the proxmox hosts to remove the cluster. I made the same mistake last year sometime and was able to remove the cluster and each of the proxmox machines works as it should standalone. I don’t recall the exact steps but it was very easy. A quick search for “proxmox remove cluster” gave me this result and from what I recall these are the steps I followed as well. https://rostislavjadavan.com/posts/promox-delete-cluster

This looks cool, and there is an itinerary plugin as well. And a community workaround to self host syncing. I’ll check it out, thanks!!

Gotcha, I’ll check that out.

Unless I can find something better I’ll just use a combination of Joplin and a spreadsheet for now, and maybe make a little self hosted solution as I figure out my own needs.

This is close to what I’m looking for, but won’t work on my iOS device while travelling. Can KDE apps live alongside a Gnome DE? I’ve never had a need to look into it.

This could work, yeah. I already use Organic maps so fits. I’ve seen a trip planning notion template, but I use self hosted Joplin so maybe I can adapt it for now.

Maybe I’ll work on an actual app myself though. I’m not super knowledgeable but could do something basic. Could be a fun project to work on in the spring.

This is ringing bells from like 2018 when I was last looking at this kind of stuff. Maybe they abandoned it or it became one of the available paid apps or something.

I feel like I’ve seen something like this as well but can’t find any reference. Lots of open source trip planner hits, but for routing a drive, not for a trip itinerary/planning.

Thanks for throwing me down a rabbit hole lol, I learned so much today. I spent a good chunk of the day researching this stuff, and found a couple of options. Came across these HP NC522SFP 10Gb NICs, someone selling 2 for under $100. My understanding is I can pair these with the generic DACs at FS.com (thanks for sharing this btw) and any 10Gb SFP switch, and I will be able to get the 10Gb link? And right, a transceiver to get the link from the ISP to the router.

I still have to do the runs for the second floor and other half of the main, but the basement is done. The whole NAS, HV, router and all that live in the basement, and the main PC will be moving there so would be easy enough to do some fiber runs there, and it’s all short. I think the longest would be 15 feet. Thanks!