You mean like a Kinesis Advantage2 (and its predecessors)? Monoblock, 20 degree built-in tenting, thumb keys and key wells.

(The linked keyboard looks quite bad from an ergonomics perspective. It has quite large positive tilt, which is bad for your wrists.)

Thanks! The confusing thing in the original message is that, in context, hotswap socket makes you think of a hotswap socket for the microcontroller itself, not a switch.

> I’m deep in the rabbit hole now, though, on a Corne, as I found besides ulnar deviation, right pinkie overload was the next cause of pain.

Also two of Corne’s thumb keys are far too much inward 😬, known to cause thumb issues.

I had wrist pains every now and then over the years. They never felt bad enough so find a doctor, so it never had a specific diagnosis.

Then I had a worse brush with wrist pain I decided to try several split keyboards (Microsoft Sculpt on and off, Kinesis Freestyle Edge, Ferris Sweep, Kyria) and they didn’t really improve things and sometimes gave me new pains. Only after switching to a Kinesis Advantage2 I saw large improvements and wrist pains mostly going away.

I also started to be more mindful of taking breaks (sometimes it works out, sometimes I am so focused that time flies by) and do some hand exercises during breaks. I also got an easily adjustable standing desk (just a press of the button), so I can tune it to have exactly the right height and switch between sitting and standing.

I use an Ender 3v2. It’s fine, but I wouldn’t necessarily recommend it. It seems to have quite a bit of wear and often requires retuning stuff to get good prints. Also needs upgrades to make it better (like getting auto-levelling).

> If you’re interested in something different, one really promising keyboard project just launched: Svalboard.

I have no experience with the Datahand, but the lateral finger movements necessary on that board look 😱. On a regular column stagger keyboard only the index finger makes a lot of lateral movements (meh) and the thumb (but following the natural thumb arc anyway).

You missed the original contoured keyboard, Maltron: http://www.maltron.com/store/p20/Maltron_L90_dual_hand_fully_ergonomic_(3D)_keyboard_-_US_English.html

I have/had a Dactyl, Advantage2, and Advantage360, but the Glove80 is definitely my favorite!

Yeah, IMO the promotional posts really got out of hand on the old subreddit. A certain manufacturer (who do make lovely cases) posted pretty comparable pics every 2 days or so. On the one hand I think we should nurture our vendor community, on the other hand I’d rather see this happening organically with users sharing their experiences with builds that they buy. I agree that a sticky thread would be a good solution, people who are interested could just follow that thread. To give it more freshness, maybe it could be a monthly Vendor news in [August, …] thread where vendors could post.

I think the only exception should be made for announcements of things like new case files or GitHub repos with Gerbers (which can include a link to the vendor that made it). Only permitting that type of vendor posts outside the vendor thread would encourage vendors to make new source files available.

For me it doesn’t matter much. Since I have a contoured keyboard nearly all alpha keys are easy to reach with my hand on the palm rest (not hovering). But I’d rather have h on the home row as well, since it reduces finger movement for frequent bigrams like th. I have backspace on one of my thumb keys, but I don’t use it frequently, to it’d be more optimal to put a letter like e there, so that h can move to the home row. So even though I use Colemak-DH, I am experimenting a bit with other layouts like Maltron since I don’t believe Colemak it necessary among the best layouts, it just gained quite a lot of popularity. Well and it’s fun to rewire parts of your brain :).

It’s a bit of a shame that layouts are high effort. Given a large enough budget, you can try multiple ergo keyboards. But the cost of learning a layout is so high that people experiment only little with it (if at all), so people continue to use QWERTY or if they learn something else it would be Colemak now or Dvorak 20 years ago. Of course Colemak and Dvorak are large improvements over QWERTY, but they may also be local optima.

Still in the honeymoon phase. I hope to write up a review after a longer time.

Sure, but as @galilette@galilette@mander.xyz mentioned, this move is not great on non-contoured keyboards.

The index finger is tricky because being a long finger, it is comparatively better to extend up than to curl down (assuming your wrist is neutral or slightly raised)

Ah, thanks, that makes sense. I guess I have that issue less, since I use a contoured keyboard and curling the index/middle fingers is pretty comfortable.

I’d recommend you to only practice a new layout on a column stagger keyboard if you have to use a row-stagger keyboard occasionally (type on someone else’s computer, laptop, etc.). For me at least it was much easier to retain QWERTY muscle memory doing that, because they are completely separate for me now QWERTY-row stagger, Colemak-DH-column stagger.

(Though I am planning to move away from Colemak-DH, so my column stagger memory is going to be a bloody mess for a while.)

d is the 11th most frequent letter [1], so there are many other letters vying for the 8 main home row positions. However h is 9th, it’s a good candidate for a better position, since it occurs in the two most frequent bigrams (th and he).

Since backspace is used far less than frequent letters by competent typists and enter is also relatively infrequent, it is probably best to put something like e on the thumb cluster, so that h can be on the home row.

[1] http://norvig.com/mayzner.html

It’s fine. I use mod DH, but it’s only a marginal improvement compared to getting an ergo keyboard (with thumb keys, key wells, split, columns stagger, etc.).

All the recent keyboard work I have done with the Pinecil and it’s great. I use both a pointed tip and a chisel tip. The pointed tip is nice for most PCB work, the chisel for things like hand wiring.

The soldering work looks pretty rough (practice on a throwaway project first). Probably one of the TRRS or MCU pins is not well connected. Get out a multimeter and do a continuity check of all the connections. It could also be misconfiguration of QMK, but make sure the basics (hardware connections) are right first.

I found the position of the hand rests really weird from the pictures. But then I put my hands on a Model 100 that I have and they are in a similar position. Given that the layout and the keycap profile look the same as the Model 100, this pretty much looks like a plastic monoblock version of the Model 100.

That color though 😘, we should have more boldly-colored prebuilt keyboards than all the boring black/grey.

Someone listed one on an online marketplace (sorta like the Dutch craigslist) without a price. It had already been on offer for six days (probably not a lot of interest in ergo keyboards there), so I offered 150 Euro and he agreed.

Improved key wells, thumb clusters with more reachable keys, more compact and light (nicer for travel), switch choice, RGB backlight (handy for status report like battery life, active layer, Bluetooth profiles, etc.), function keys (which some people want), uniform key cap profile (can be rearranged when using eg. another layout).