It’s amazing how effectively just hearing this from someone who has firsthand insight can put it in perspective.

Further to that third point as well, there’s probably also a question simply of opportunity. You could take the Munich situation as evidence of capability, but it may also have been opportunity plus capability. Intelligence seems like it’s a pretty difficult game and perhaps the successes in operation bayonet had to do with fortunate and unlikely intelligence scoops that they have not luckedh upon this time around and can’t rely upon as a strategy. Also, while I don’t know much about the post-Munich assassinations, it sounds like they went on for over twenty years, didn’t really take out many of the actually important, directly involved individuals and a lot of the people they would have logically wanted to target successfully went in to hiding out of their reach so if the strategic goal is to behead the organisation that carried out attacks as a defensive strategy to weaken their capacity to do it again, 20 years just to take out relatively minor unimportant figures isn’t really going to work.

That said, it also looks, as many have stated, like “taking out Hamas” is more a convenient political smokescreen for a much more sinister goal so a very successful intelligence operation that rapidly took out all their leadership at once would actually run counter to their true objectives in this scenario.

Wow. That was fucked up.

I think he’s famously at least eaten a lot of McDonalds.

deleted by creator

I don’t know how to program, but to a very limited extent can sorta kinda almost understand the logic of very short and simplistic code that’s been written for me by someone who can actually code. I tried to get to get chat GPT to write a shell script for me to work as part of an Apple shortcut. It has no idea. It was useless and ridiculously inconsistent and forgetful. It was the first and only time I used chat GPT. Not very impressed.

Given how it is smart enough to produce output that’s kind of in the area of correct, albeit still wrong and logically flawed, I would guess it could eventually be carefully prodded into making one small snippet of something someone might call “good” but at that point I feel like that’s much more an accident in the same way that someone who has memorised a lot of French vocabulary but never actually learned French might accidentally produce a coherent sentence once in a while by trying and failing 50 times before succeeding and then failing again immediately after without ever having even known.

I think you might be misunderstanding the whole advantage of the fediverse idea in the first place.

The thing is, in a scenario where it’s as big as Reddit in terms of users, most of the content on the fediverse then would be local to them so if they defederated everyone or everyone defederated them, who’d really be cut off from whom? They’d probably only be marginally less appealing to their user base who might not even know how the whole fediverse thing worked anyway.

Definitely. At least the damage could be largely limited to just that instance though. I can’t seriously imagine the people behind it letting their ideals trump profit for an extended period of time, especially with financial imperatives from the costs associated with the infrastructure required if that one instance alone had so much traffic.

Theoretically though, if it started going rancid it’d be much easier to jump ship without losing out on too much, that is unless they defederate with everyone or everyone defederates with them, either of which could be distinct possibilities. In that case, I guess you’d just have another Reddit.

Oh no! Guessing you wanted to resume?

It’s been at least 3 hours now. Which was it?

Thanks for all the help mate, got it working, see update.

oh bugger. The results were underwhelming to the say the least. NOTHING happens. I was expecting I might have trouble getting things working right away but I must say I wasn’t expecting literally nothing to happen.

I have the card in the PCIe slot on the chassis, the ATX PSU screwed in place and the cables from the PSU plugged in to the chassis 24 pin and 4 pin slots. I turned on the chassis’ own switch, the PSU’s switch and also plugged the thunderbolt cable in and nothing. No fans whirring, no smell of anything frying, no sound indicating I’d just broken 3 expensive pieces of equipment at once, just nothing. Any ideas? The chassis in question is this thing https://peladn.com/products/graphics-card-docking-station-1 and the PCIe card is this thing https://www.blackmagicdesign.com/au/products/decklink/techspecs/W-DLK-32 .

It’s all hooked up like this https://imgur.com/a/nothing-happens-PftKNUk

Thanks so much, this is very encouraging. The eGPU chassis has it’s own little built in power switch. It also has a 24 pin socket that it needs to power itself so hopefully I don’t need to do anything complicated like simulating anything as I’m a little lost by that idea. The power supply itself has a power on/off switch as well.

In the interests of brevity I may have given the wrong idea of the setup. I’m trying to make use of an old Blackmagic Decklink mini-monitor 4k pcie device. I now use a laptop with TB4 ports, rather than the PC this card used to sit it. This card is actually not a GPU, which this eGPU enclosure is supposed to be for, but I’m hoping it will work just the same. It’s a TB4 eGPU chassis that takes an ATX power supply and has a single PCIe 16x slot. The card is actually a 4x slot but I think it should work. Anyway there’s only the one power supply, this old 600w PSU that I’ve cannibalised from my old PC.

The manual, entirely in Chinese and only a couple of pages long, says to connect the enclosure to the PSU and the PSU to the GPU. That’s all. Although even if it were a more rigorous manual I don’t know if they could really provide much guidance here. It’s designed for you to use whatever PSU you want, either ATX or SFX and just hook it up.

I’m just asking because I haven’t done a lot of PC building before and am not familiar with the ins and outs of types of PSU connectors. In this case, I’m unsure why the PSU manufacturer group these 2 connectors together but gave the customer the option to separate them.

Fuck this one guy in particular.

I need it to dual purpose as central storage for editing though. That has no chance of working wirelessly. Whether NAS or DAS it’ll have to be connected directly to the lappy to ever work for editing, but the N part of being NAS could be handy for the wireless streaming of compressed media for entertainment purposes. I can do that with DAS and using the laptop as the server part of the operation, but it might prove to be smarter to directly attach a NAS by cable to the lappy for editing and let it connect to wifi itself for serving up media to watch in the rest of the house. In that second scenario I guess I’d have the NAS running jellyfin or emby or whatever and running that NAS 24/7. Just not sure on which arrangement makes more sense and is most efficient and cost effective.

The laptop can definitely handle it, both on paper and in practice in the actual scenario we’re describing as well as for more demanding editing tasks, it does this task absolutely flawlessly as one might expect, I’m just unsure if I want to keep it running 24/7 for the home media streaming hence the possibility of a NAS or your router suggestion. But I can’t picture a router having the resources to handle transcoding or really running much of anything. Granted though, it just serving up files to me without any kind of server software is tempting in it’s simplicity.

hmm. That is an interesting idea. I guess the router wouldn’t have the juice to do anything other than serve up the file though? No running of jellyfin or transcoding on the fly for chromecast or anything like that?

That’s what I was thinking. My biggest home project are only a 1-2 TB max, and most are more in the order of 200-400GB. The type of DAS options I’m thinking of would be RAID systems. I’m fond of the LaCie ones just because of familiarity and relative reliability, but I do think they’re overpriced and they went through a period a few years ago, of a pretty major quality dip. I haven’t dealt with them much since but I think they seemed to have pulled themselves back up from that.

It’s not a major concern that I’d spend a lot of money on, but the idea of self-hosting a little mini home netflix seems fun and I guess for that I’d want things to be always on. Ideally there’d be one piece of hardware for each purpose given it’s a little unprofessional to host my home viewing content on the same storage as professional media, and I guess if the drives are always spinning then they’d wear faster just so they can be ready at a moment’s notice for me to watch TV but I don’t really have the space or money to buy dedicated equipment for each so I’m hoping to dual purpose here. There’s always the option to buy a cheap ‘passport’ drive that’s always connected to the laptop as the ‘media server’ for my jellyfin content and have the laptop be running the jellyfin server as it is now, it’s just, I guess I wondered if that made less sense because I’ll need more editing storage eventually anyway, and maybe running my very expensive laptop 24/7 would cost more in the long run than running a NAS.