I’m doing dactyl manuform first time (also my first ergo. keebs). Buying parts, soldering, wiring matrix like instruction. When i plugged in computer and flashing firmware, it only respond D, F, Space keys
I don’t know why it doesn’t work like it supposed to be, i have unpluged the pro micro, plugged and flash firmware again, and the problem is still there
Can someone see what wrong with my wiring?
does both sides fail? I would say it's something with your wiring.
Try swapping the cables, also you can do a short in each key socket to simulate a key press but removing the possibility of a bad switch. And check again if all the cables are connected were they are supposed to be