I’m looking at different options for getting a NAS/RAID array system that is tolerant to not just hard drive failures but also to hardware/firmware and board failures. I’ve utilized a RAID array in the past that was built into the motherboard, which resulted in the motherboard failing and me having to ebay another one to get the RAID array back up and running. Then I bought a NAS 2 bay drive that was only compatible with drives up to 1.5TB. I’ve also used external drives for backup since I’ve been burned by hardware/firmware/software issues related to RAID arrays. Are there are any PCI RAID cards, NAS boxes or software RAID or other options where the hard drives would still be readable by other RAID cards if the boards failed? Maybe a software RAID solution? Any thoughts would be appreciated.
> ZFS zRAID is pretty good for this I think. You hook up the drives from one “pool” to a new machine, and ZFS can detect them and see that they constitute a pool and import them.
I second this approach, but if one isn’t down with ZFS, LVM can bodge a raid onto any filesystem at the block layer. I don’t remember when I got over hardware raid envy and decided that I preferred software raid for my home lab, but it was a long while ago and I’ve never regretted it. Being able to plug some drives into any old USB, sata, or whatever port on any Linux box is super valuable when things start going sideways and you don’t have budget for spare hardware or rapid-response support contracts.